Here's the Know-How

Providing real-time information to building occupants

The term mass notification originated with the Unified Facilities Criteria (UFC) document 4-021-01, titled Design and O&M: Mass Notification Systems, created by the Department of Defense (DoD). The UFC outlines the design, operation and maintenance of mass notification systems (MNSs) required on all DoD properties, including posts for the Air Force, Army, Marine Corps and Navy.

The UFC defines mass notification as “the capability to provide real-time information to all building occupants or personnel in the immediate vicinity of a building during emergency situations. To reduce the risk of mass casualties, there must be a timely means to notify building occupants of threats and what should be done in response to those threats. Pre-recorded and live-voice emergency messages are required by this UFC to provide this capability.”

The UFC recommends the use of a combined fire alarm and mass notification system, particularly in new construction of military facilities, where the building fire alarm control panel forms a single combined system that performs both functions. For smaller buildings, the public address system may also integrate with this combined system, provided the PA system can be supervised for integrity.

Codes and Components
Initially seen as a solution for the military, MNSs are gaining popularity outside the armed forces. The 2010 edition of NFPA 72: National Fire Alarm & Signaling Code’s lengthy Chapter 24 outlines requirements for the design and installation of emergency communication systems within commercial facilities. While recent events such as the Virginia Tech campus shootings and severe weather incidents have raised demand for emergency communication systems for commercial properties, the new NFPA codes have begun to set a precedent of using fire alarm systems to support the added duties of a supervised and more survivable ECS.

So that MNSs serve as more than a common fire alarm voice evacuation system, NFPA 72 requires that “security personnel should be able to effect message initiation over the MNS from either a central control station or alternate (backup) control station. Where clusters of facilities exist, one or more regional control stations might also exercise control.” It also requires the MNS to offer a “dynamic library of scripted responses to various emergency events that would be easily customizable to meet the needs of the individual customer.”

To service this need, distributed messaging units, commonly referred to as local operator consoles (LOCs), are typically tied to the fire alarm/ECS network and installed throughout a facility or campus to provide authorized users a means systems such as e-mail or reverse-911 systems offer alternative methods for alerting occupants. However, these technologies are not supervised for faults or breaks, nor do they encompass a more “survivable” design that would enable the ongoing delivery of accurate communications even if one or more parts of the system’s network were down. Likewise, there are no codes or standards in existence that require these systems to be regularly tested and maintained to a specific level of performance.

NFPA 72 makes clear that distributed recipient notification systems such as text messaging or e-mail shall not be used in lieu of required audible and visual alerting emergency communication systems. This is due to the possibility of delivering conflicting information such as a text message directing a person to remain in place while the fire alarm system in the building provides the evacuation message. If the fire alarm evacuation system is activated before the occupants receive the message, there could be confusion.

For the same reason, NFPA 72 requires that a building’s fire alarm and emergency communication systems be integrated and programmed to allow all ECS functions to supersede the fire alarm. This priority setting avoids the situation of a fire alarm evacuating a building while a message to “shelter in place” is sent through the same facility’s ECS.

Today, a layered approach using a fire alarm/ECS and an integrated distributed recipient notification system is considered the best solution for reaching the largest number of occupants. However, the sequence of notifications -- from all systems -- must be considered, and any potential delays in the transmission of communications must be minimized.

For these reasons, all systems should be integrated and coordinated with a facility’s emergency plan.

In the middle of an emergency, flashing strobes accompanied by live or pre-recorded audible instructions tend to have a much higher effect on occupants.

At the same time, highly visual signs in large areas of assembly can offer information specific to the emergency or display a simple message such as “evacuate.” To deliver voice instructions to those outside, large speaker clusters can be installed on the exterior of a building or throughout a campus.

Using a combination of audible and visual notification devices, such as strobes, voice communications (indoor speakers and outdoor Giant Voice variety speakers) and programmable LED signage is considered the most intrusive solution for capturing the attention of occupants and delivering a clear, audible message.

For multiple buildings or campuses spread across a city, state or even the globe, some fire alarm manufacturers such as NOTIFIER have harnessed VoIP technology to deliver live voice messages to anywhere in the world via the Internet. These state-of-the-art systems include one or more workstations from which security or facilities personnel can send emergency communications via VoIP.

Fire alarm system manufacturers and installers work within a tightly regulated industry, which was the first to create requirements for the design and installation of ECS for commercial properties. The marriage of ECS and fire alarm control systems is a growing trend that is expected to continue reaching into larger varieties of facilities and multi-building properties, including K-12 schools, high-rise buildings, mass transit hubs and even public gathering places such as theaters, restaurants and places of worship.

This article originally appeared in the September 2011 issue of Security Today.

Featured

  • Maximizing Your Security Budget This Year

    7 Ways You Can Secure a High-Traffic Commercial Security Gate  

    Your commercial security gate is one of your most powerful tools to keep thieves off your property. Without a security gate, your commercial perimeter security plan is all for nothing. Read Now

  • Surveillance Cameras Provide Peace of Mind for New Florida Homeowners

    Managing a large estate is never easy. Tack on 2 acres of property and keeping track of the comings and goings of family and visitors becomes nearly impossible. Needless to say, the new owner of a $10 million spec home in Florida was eager for a simple way to monitor and manage his 15,000-square-foot residence, 2,800-square-foot clubhouse and expansive outdoor areas. Read Now

  • Survey: 72% of CISOs Are Concerned Generative AI Solutions Could Result In Security Breach

    Metomic recently released its “2024 CISO Survey: Insights from the Security Leaders Keeping Critical Business Data Safe.” Metomic surveyed more than 400 Chief Information Security Officers (CISOs) from the U.S. and UK to gain deeper insights on the state of data security. The report includes survey findings on various cybersecurity issues, including security leaders’ top priorities and challenges, SaaS app usage across their organization, and biggest concerns with implementing generative AI solutions. Read Now

  • New Research Shows a Continuing Increase in Ransomware Victims

    GuidePoint Security recently announced the release of GuidePoint Research and Intelligence Team’s (GRIT) Q1 2024 Ransomware Report. In addition to revealing a nearly 20% year-over-year increase in the number of ransomware victims, the GRIT Q1 2024 Ransomware Report observes major shifts in the behavioral patterns of ransomware groups following law enforcement activity – including the continued targeting of previously “off-limits” organizations and industries, such as emergency hospitals. Read Now

Featured Cybersecurity

Webinars

New Products

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols. 3

  • QCS7230 System-on-Chip (SoC)

    QCS7230 System-on-Chip (SoC)

    The latest Qualcomm® Vision Intelligence Platform offers next-generation smart camera IoT solutions to improve safety and security across enterprises, cities and spaces. The Vision Intelligence Platform was expanded in March 2022 with the introduction of the QCS7230 System-on-Chip (SoC), which delivers superior artificial intelligence (AI) inferencing at the edge. 3

  • Camden CV-7600 High Security Card Readers

    Camden CV-7600 High Security Card Readers

    Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure. 3